ALTAIR 4 has an optional Motion Alert feature in case the user is overcome and requires assistance. When enabled, Motion Alert will activate a pre-alarm if ALTAIR 4 does not detect motion for 30 sec. If there is no motion detected after a further 10 seconds the detector goes into Motion Alert alarm. This could prove to be invaluable in potentially life threatening situations.
This unique feature gives users the ability to manually activate an alarm to attract the attention of anyone nearby. In situations where voice communication is difficult [e.g. when wearing masks] this standard feature further increases piece of mind for the user.
ALTAIR 4 is IP67 rated and is designed to withstand a 3 m drop test. The extra thick rubberised housing provides protection from accidental drops. Its tight seal ensures simple yet effective resistance to water and dust ingress. ALTAIR 4 will perform reliably even in the harshest industrial environments.
The ALTAIR 4 display is straightforward and extremely easy to read. The large numeric display allows users to view gas concentration, alarm conditions, battery status, set points and peak reading with accuracy and confidence.
With its three large heavy duty buttons information is always easy to find. The buttons are designed so they can be pressed even when the user is wearing gloves.
The rechargeable lithium polymer battery provides up to 16 hours of continuous operation and outperforms other battery technologies in extreme environmental conditions.
The ALTAIR 4 allows for a simple bump check, which will be recorded and displayed on the screen as a checkmark for 24 hours. Either insert the ALTAIR 4 into the QuickCheck or attach the calibration cap to carry out a bump check.
The triple alarm system fitted to the ALTAIR 4 effectively cautions the user to any danger. Super-bright LEDs on the detector’s top and bottom ensure alarms are visible from all angles. The ALTAIR 4 also has a confidence safe LED that flashes every 15 seconds to indicate the detector is working properly. The audible alarm is typically measured at 95 dB at 30 cm and a strong vibrating alarm is also a standard feature.
A highly comprehensive datalogging facility is standard on ALTAIR 4. This allows the user to keep a record of day-to-day gas values detected at a configurable time interval along with any other events seen.
