HOM Automation Pvt. Ltd.

Features

• Road block shall be a below ground assembly containing heavy gauge
  I-section and steel plates.  I-section structure absorb the impact and
  efficiently distribute the force of impact to the surrounding reinforced
  concrete, thus the system is work even after impact.  The system capable
  of being raised to above ground position within 3 to 6 seconds.
• The height of structure above the surface of road block shall be
  600mm. In raised position the blocker shall be hydraulically locked with
  antileak device.
• Depth of installation shall be less than 800mm so as not disturb
  underground cables and other services.
• System shall be able to bear axle load of 30 tons of moving vehicle.
• Hydraulic Power Unit shall be placed in a separate weather resistant
  enclosure. The design shall provide easy access to the HPU for
  maintenance and emergency operation of the hydraulic system.
  Enclosure shall be provided with a corrosion resistant coating.
• A sump pump shall be supplied to drain water collected in the road
  block foundation (optional) or water drainage provided by end user.
•  Foundation and underside of the road block shall have asbestos free
  coating for corrosion protection. Face plate shall be painted Black &
  Yellow.
• Microprocessor based control panel shall control the electro-hydraulic
  operations. It shall be capable of receiving signals from variety of
  activating devices such as push button, remote control, proximity cards,
  optical beam sensors, loop detectors and biometrics etc.
• Microprocessor based control panel shall be capable of integrating
  the Road Blocker with Boom Barrier so that the two can be activated with
  a single activating device in a synchronized manner.
• Microprocessor based control panel shall be able to communicate
  with crash pad mounted on Barrier Boom so that if the boom is hit by
  vehicle the Road Block should come in raised position automatically.

 

 

 

<table border="\&quot;1\&quot;" cellpadding="\&quot;1\&quot;" cellspacing="\&quot;1\&quot;" style="\&quot;width:" 500px;\"="">

Technical Specifications   Road Blocker

Power Supply

Height of Road Blocker

Width of  Road Blocker

Length of Road Blocker

Mechanism Type

Motor

Power Consumption

Operating Temperature

Opening Time

220V , Single Phase, 50 Hz

600mm

840mm

3650mm

Hydraulic

Single Phase, 1440rpm, 3HP

2.2kw

-20 to 60 degree centigrade

 3- 6 seconds