Features
-
Bollard shall be a below ground assembly containing heavy gauge
stainless steel round pipe, I-section and steel plates. I-section structure
absorb the impact and efficiently distribute the force of impact to the
surrounding reinforced concrete. The system capable of being raised to
above ground position within 3 to 6 seconds.
-
The height of structure above the surface of ground shall be 915mm. In
raised position the bollard shall be hydraulically locked with antileak
device.
-
System shall be able to bear axle load of 30 tons of moving vehicle.
-
Hydraulic Power Unit shall be placed in a separate weather resistant
enclosure. The design shall provide easy access to the HPU for
maintenance and emergency operation of the hydraulic system.
Enclosure shall be provided with a corrosion resistant coating.
-
A sump pump shall be supplied to drain water collected in the bollard
foundation (optional) or water drainage provided by end user.
-
Foundation and underside of the bollard shall have asbestos free
coating for corrosion protection.
-
Push button and remote control unit shall be provided as an inbuilt
activating device.
-
Signal lights shall be provided to alert vehicle drivers of bollard
Position (optional).
<table border="\"1\"" cellpadding="\"1\"" cellspacing="\"1\"" style="\"width:" 500px;\"="">
|
Technical Specifications |
|
|
Bollards |
|
Power Supply
Height of Bollard
Diameter of Bollard
Mechanism Type
Motor
Power Consumption
Operating Temperature
Opening Time
|
220V , Single Phase, 50 Hz
915mm
275mm
Hydraulic
Single Phase, 1440rpm, 3HP
3kw
-20 to 60 degree centigrade
3-6 seconds
|
